paladin FFC PREPARATOR LAF3566, Руководство оператора, Страница: 16 / 31

MR955512
16
OPERATION
Due to operator’s experience and the various soil types, moisture, foliage density and
debris, skid shoes may need re-adjusting during operation. Also, multiple passes requiring dif-
ferent skid shoe settings, drum speed, rotation direction and ground speed may be needed to
achieve the desire end results.
SKID SHOE ADJUSTMENT
1. Park your prime mover on a level surface with this product properly attached.
2. Place your prime mover’s transmission in “Park” and engage the parking brake.
3. Lower this product onto preplaced blocking.
WARNING! Do not use blocking made of concrete blocks, logs, buckets, barrels or any
other material that could suddenly collapse or shift positions. Do not use
wood or steel blocking that shows any signs of material decay. Do not use
blocking that is warped, twisted, or tapered. Failure to obey this warning
could result in death or serious injury.
4. Shut off your prime mover’s engine and remove the key. After all moving parts have to
come to a stop, relieve all pressure in the hydraulic lines.
5. Loosen the two .50” hex nuts that secure the right shoe. See Figure #1
TOOTH DEPTH
ADJUSTMENT
SLOTS
SKID SHOE
.50” HEX NUTS
FIGURE #1
6. Move the shoe to the proper slot for your soil condition and the operation being
performed. See Figure #2
NOTE: If, the operator determines that the best skid shoe setting for the conditions be-
ing encountered is between two adjustments shown, then the rear of the skid shoe may
be set one slot above the front of the skid shoe.