paladin Bradco VRS48, Руководство оператора и каталог запасных частей

Страница: 17 / 43

MAINTENANCE AND SERVICE
10385 9-27-05
GENERAL INFORMATION
Regular maintenance and service is the key to long equipment life and safe operation.
Maintenance requirements have been kept to a minimum. However it is important that these
maintenance procedures be performed as described in this section.
WARNING! Read the Safety Precautions section of this manual before performing any
maintenance procedure.
Follow all mandatory safety shutdown procedures outlined in the loader
operator’s manual before adjusting, cleaning, lubricating or servicing this
attachment.
EVERY 8 HOURS
Lubricate all grease fittings. (One grease fitting located on the back of the hitch frame).
Check bolts for tightness.
Check hydraulic hoses for leaks, pinching or deterioration.
Check all safety signs are clean and legible.
Replace any damaged or worn parts.
WARNING! Escaping hydraulic fluid under pressure can have sufficient force to pen-
etrate the skin causing serious personal injury. Fluid escaping from a very
small hole can be almost invisible. Use a piece of cardboard or wood rather
than your hands to search for suspected leaks.
Keep unprotected body parts, such as face, eyes, and arms as far away
as possible from a suspected leak. Flesh injected with hydraulic fluid may
develop gangrene or other permanent disabilities.
If injured by injected fluid see a doctor at once. If your doctor is not famil-
iar with this type of injury, ask him to research it immediately to determine
proper treatment.
CARDBOARD
HYDRAULIC HOSE
OR FITTING
MAGNIFYING
GLASS
EVERY 100 HOURS
Check oil level in roller shaft. (Remove 90° elbow with fittings in the cover plate. Oil
level is sufficient if oil is up to the fill hole. If the unit is level and the oil is not visible, add as
required.)
NOTE: The Vibratory Roller is a sealed unit. If oil is low, service is required.
75595 15