paladin Bradco VRS48, Руководство оператора и каталог запасных частей

Страница: 11 / 43

DECALS
10399 9-16-05
DECAL PLACEMENT
GENERAL INFORMATION
The diagram on this page shows the location of the decals used on the BRADCO Vibra-
tory Roller. The decals are identified by their part numbers, with reductions of he actual decals
located on the following pages. Use this information to order replacements for lost or damaged
decals. Be sure to read all decals before operating the attachment. They contain information
you need to know for both safety and longevity.
IMPORTANT: Keep all safety signs clean and legible. Replace all missing, illegible, or dam -
aged safety signs. When replacing parts with safety signs attached, the safety signs must also
be replaced.
REPLACING SAFETY SIGNS: Clean the area of application with nonflammable solvent, then
wash the same area with soap and water. Allow the surface to fully dry. Remove the back-
ing from the safety sign, exposing the adhesive surface. Apply the safety sign to the position
shown in the diagram above and smooth out any bubbles.
LOGO
#40149
#4468
#40678
#40150
SERIAL
NuMbER TAG
LOCATION
#40151
#40590
#4338
#4468
LOGO
MODEL NuMbER
#40149
75595 9