AFR
- WATERFAN HEATER
Manual
FURTHER INFORMATION: HTTP://WWW.PAKOLE.HU
12
Assembly
Use flexible connections to allow the hea
-
ter to be turned to the sides. Depending
on the flexible connections, the maximum
turn is 78° to both sides. Figure shows
maximum angle to one side and 50° to
the other with minimal distance left for
connections.
A set of automatic control may be used (powered 230V) that consists of the following:
- COMFORT panel – including room thermostat and switch for regulation of
3 speeds of fan. One COMFORT panel may regulate up to 3 pcs of HEATER units
- 2-way water valve with actuator; valve should be installed on a return stub of the heater
- INTELLIGENT electronic control panel with an automatic speed controller,
weekly program and BMS communication. On
e INTELLIGENT panel may regulate up to
- 2 pcs of HEATER units
- Splitter MULTI 6 - control up to 6 pcs of HEATER units from one COMFORT or
INTELLIGENT Panel
The system is ready to start once the connections between the thermostat and the valve
actuator are done, 230V power is supplied to the thermostat and the fan’s motor is powe-
red by the revs controller.
5.Automatic control-installation