AFR
- WATERFAN HEATER
Manual
FURTHER INFORMATION: HTTP://WWW.PAKOLE.HU
10
To sustain proper functioning of the device keep a safe dis-
tance– 200mm from its sides and 300 mm from its backside
(from the fan)
Mounting bracket to the heater
The bracket set consist of: a holder, two sleeves,
two M8 screws and washers. In order to mount the
bracket, drill two Ø12-13mm holes in places visibly
marked on the casing. Insert sleeves into drilled
holes and place the bracket in. The included holder
must be screwed with M8 screws with washers.
Installation of mounting pins
To mount the heater to the ceiling, use M8 moun-
ting pins. Drill two Ø8-9mm holes in places visibly
marked on the casing. Mounting pins may be
screwed into the frame not deeper than 20 mm.
Assembly of HEATERMIX air mixer
To mount HEATERMIX air mixer to the ceiling,
use M8 mounting pins. Drill two Ø8-9mm holes in
places visibly marked on the casing. Mounting pins
may be screwed into the frame of a heat exchanger
to the maximum depth of 20mm. Mounting pins and
connecting elements are not included with the unit.
Assembly
