C36
User Manual V1.2
N-Only
Channel mode:
This option will allow you to set the channel width of your access points. When
set to 40 MHz, the access points will be allowed to use more channels to increase throughput
(speeds). Although this can be beneficial, it can also cause issues. If you are in a populated area,
using more channels will increase the chances of encountering interference. A 20 MHz channel
mode is recommended for areas with many nearby access points. For the 5 GHz band, you have
the option to select 20, 40, or 80. Please note the 80 is only available when the AP is in AC mode.
Guest network (optional)
1.
The Guest Network is designed for routers that do NOT support VLANs. The Guest Network acts
as its own network with no communication to other SSIDs.
2.
To enable and set the security settings on the guest SSID, click on the guest network option
towards the upper right hand side.
3.
Here you can change the SSID and password of the guest network.
4.
After making your changes under the Guest Network, click on the
Wireless
tab to save and apply
your changes.
5.
Applying Changes will push the configuration to the access points. Once the C36 is done applying
the configuration to the access points, you will be redirected to the Access Point Overview page.
