Pahlen Jet Swim 1200, Руководство пользователя

Страница: 5 / 20

5
Jet Swim 1200
MA30-01E
ENGLISH
W2 U2 V2
U1 V1 W1
W2 U2 V2
U1 V1 W1
Pressure
switch
Connector
Motor circuit
breaker
PE
Micro
switch
Connector
Motor circuit
breaker
PE
Pressure
switch
Product Description
Jet Swim is an apparatus used for training, exercise and recreation. It features an adjustable jet stream for personal
customisation of the water flow and air admixture.
Technical Data
Motor 2.2 kW
Volage 230/400V 50Hz 3N~ 265/460V 60Hz 3N~
Current 7.6 / 4.4 A 7.4 / 4.3 A
Pump capacity 900 l/min
Enclosed protection class Pump X4, Control box IP45
General information
Jet Swim 1200 consists of four parts: Base kit 1301200
Assembly kit
1301210 Liner, 1301220 Concrete/liner or 1301230 Concrete
Pump kit 1301280-01 (50Hz), 1301280HZ-01 (60Hz)
Control box 1301290 400V, 130129NO 230V Norway only
The pump section is installed on a stable surface in a dry area. Make sure that the area is well ventilated and is equipped with
a drain in order to prevent flooding.
All installation of stainless steel parts shall be done using tools solely intended for such material in order to maintain its
corrosion-resistance.
Recommended Values with Regard to Water Quality
Free chlorine: 0.5–1.5 mg/litre (ppm) pH-value: 7.2–7.6
Combined chlorine: 0–0.5 mg/litre (ppm) Alkalinity: 60–120 mg/litre (ppm)
Totalt chlorine: 0.5–2.0 mg/litre (ppm) Calcium hardness: 100–300 mg/litre (ppm)
Chloride (salt) content: max 250 mg/litre
Safety
The jet stream is powerful, which is why one should not be closer than 0.5 m from the stream outlet for a protracted period.
People with long hair should pay careful attention so that their hair does not get stuck in the inlets (the perforated openings in
the stainless steel front).
Small children should not be in the pool without supervision, especially not when the Jet Swim device is in operation.
Always inform all the other bathers in the pool before starting the Jet Swim.
Electrical Installation
All electrical connections shall be made by an authorised electrician.
The device shall be fitted with a residual current device.
The pump motor is connected via the control box for Jet Swim 1200, see the circuit diagram.
Check the rating plate on the pump motor for the correct connection on the closing link.
Make sure that the pump motor has been connected in the correct direction of rotation (see the rotation direction arrows on the
pump motor). The wrong direction can damage the pump. N.B.! The pump must never be started without being filled with water.
Make sure that the motor protection in the control box is set according to the rated current of the pump motor; see the rating plate.
Circuit
Diagram