pagertec Server Paging System, Руководство пользователя

Страница: 5 / 9

5
Installing the Server Paging System
GENERAL INFORMATION
The Server Pagers are used in conjunction with the Pagertec transmitters. The staff
pagers are used as an on-premise paging system to increase efficiency by alerting
staff members to return to the kitchen usually to expedite food. who are waiting, usually for
services or goods.
CHARGING BASE INSTALLATION
1. Install the charging base.
2. Charge pagers for 24 hours prior to first use.
Note: Keep rechargeable pagers on charge even during extremely long periods of
inactivity.
OPERATION
1.
When a staff member arrives, they can remove a pager from the charging station.
Pagers will light up for 3 seconds.
2.
Staff members must write their name with a dry-erase marker next to their pager
number on the transmitter.
3. To Page the staff member press on the pager number next to their name on the
transmitter.
4. Pagertec Server Pagers will flash or vibrate (if enabled) depending on the
programing.
Note: The page can be shut off from the pager by pressing the ignore
button on the pager.
5. If transmitter is set to repeat the call, the staff members must return to the transmitter
and shut off the page by pressing their pager number button again.
6.
Transmitters can also send predefined time limits for each of the pager alert modes.