OUT OF RANGE (FACTORY DEFAULT: OFF)
With this feature, the coasters will beep when taken out of range of the transmitter to
inform the guest that they are too far away and will miss their page. The beeping will
automatically stop when they step back within range.
Be sure you have all your coasters before performing this procedure.
TURNING THE OUT OF RANGE ON
•
Remove all the coasters from the charging unit or unplug the power supply that
is connected to the first charging base.
•
At the
“Out of Range”
menu, press the
“#/Select”
key to turn the out of range ON.
•
Press the
“ENTER”
key. After sending the signal, all the coasters will light up once to
tell you that they received the new code.
•
Press
“CANCEL”
key to exit the system programming menu.
RANGE TEST (FACTORY DEFAULT: OFF)
With this feature you can determine what distance your transmitter will cover.
•
Remove a couple of coasters from the charging stack.
•
At the range test menu, press “#/Select” key to turn range test “ON” and to start the
range test. As soon as the range test is activated you’ll notice the coasters flash once
every 30 seconds. Walk around your property. When you reach the point where the
coasters do not flash consistently, this is your maximum range. If you would like to
increase your power level, exit range test and call Pagertec.
•
Press the
“CANCEL”
key to stop the range test. Press the
“CANCEL”
key again to
exit the system programming menu.
NOTE:
The transmitter has an auto shut off feature
that will stop the range test after 15 minutes.
7
Содержание Matrix Plus
Страница 1: ...Matrix Plus System USER GUIDE...
Страница 10: ...8...
