pagertec Matrix Plus, Руководство пользователя

Страница: 6 / 10

To change the alert type of your pagers follow the below instructions:
1. At the “Set Alert mode” menu press the
​
“ENTER”
​
key
Select one of 1~4 Alert modes then press
​ “SEND” ​ key.
1. LED
2. LED / Vibe
3. LED / Beep
4. LED / Vibe / Beep
5. Vibe
6. Beep
Use the ​ “▲”“▼” ​ key to scroll through these 6 alert modes.
Pagers that have successfully received the change alert mode message will blink all LED
lights.
At this point, all of the pagers in your system should alert with the alert mode that you
selected.
Press ​ “C” ​ key to exit, and return to the main menu.
Note: ​ Put all the pagers on the charger and disconnect the power supply going to the
charger. Connect the charger back to the wall outlet. You will have three (3) minutes to
program the Set Alert Time.
​ SET ALERT TIME
With this feature, you can set the alert time how long the pager alerts when the pager
receive the signal from the transmitter.
To change the Alert time mode of your pagers, follow these
instructions: 1. ​ At the ​ “Set Alert Time” ​ menu press ​ “Enter”
2. ​ Use the ​ “▲”“▼” ​ key to scroll through the different times
3.
​
Select one of 9 Alert times as below then press
​
“SEND”