CLEANING
Pagertec pagers are made from industrial-strength, polycarbonate material. However,
this material is susceptible to hairline cracking if non-approved cleaners are used. When
cleaning Pagertec pagers, you should only use ETHYL ALCOHOL (ethanol) or
ISOPROPYL ALCOHOL-BASED CLEANERS.
We have done extensive testing with available cleaning materials and have not found any
issues with either ethyl alcohol (ethanol) or isopropyl alcohol (IPA). ALL other cleaners
are not recommended for use on any of our pagers. To clean the equipment:
1.
Take a clean cloth and an isopropyl-alcohol based cleaner
2.
Wet the clean cloth with the isopropyl alcohol cleaner
3.
Wipe down the pagers or equipment
4.
When dry, place rechargeable pagers back on charge
SYSTEM PROGRAMMING:
To enter programming mode, press the “SETUP” button on the transmitter and enter the
password “4545” followed by “enter”. If the password is accepted, the display will show
“Menu Option Up Down”. (Use the “↑”& ”↓” key to scroll through the different menu options
or press “CANCEL” to exit the system programming menu.)
SET TIME
With this feature, you can setup current time into the Transmitter.
At the
“Set Time”
menu set the hour using Number key and then press, use
“#”
to set
AM/ PM.
SET ALERT MODE
Note:
Put all the pagers on the charger and disconnect the power supply going to the
charger. Connect the charger back to the wall outlet. You will have three (3) minutes to
program the Set Alert Mode. With this feature you can have the option of changing your
pagers alert type.
4
Содержание Matrix Plus
Страница 1: ...Matrix Plus System USER GUIDE...
Страница 10: ...8...
