www.pagergenius.com
User manual
9
T9050/P2000
FAQS AND TROUBLESHOOTING ISSUES
Q:
Pagers do not vibrate, beep, or light-up anymore.
A:
Make sure that the feature alert mode is set in the correct setting (See page 7).
Q:
The range of the transmitter covers most of the building and parking lot,
but I need the signal to cover the entire area.
A:
If you need to increase the range of your current paging system, Pager
Genius has the tools to do this. We sell a Pager Genius Range Extenders
(Model RE-100) on our website
www.pagergenius.com
.
Q:
One of our pagers is dead.
A:
Make sure there are no obstructions on the bottom two metal charging
docks on the pager's rear.
Q:
One of the pager is displaying LOBT?
A:
When a pager is displaying LOBT the battery level is low. Place the pager back
on the charging base, look for the charging indicator light, and wait for the five
to ten minutes, and the pager number will reappear. Please refer to page 6.
Q:
I have pagers displaying the same number?
A:
You will need to re-set the pager to the transmitter to change the pager
number. Please refer to page number 5.
Q:
One of my pagers stopped beeping or vibrating?
A:
You will need to change the settings on that pager to bring back a feature.
Please refer to page number 7.
Make sure your charging bases are plugged into a suitable power
outlet. Next, make sure all your charging indicator lights are on to
make sure the pagers are charging correctly. Also, make sure that the
pager charging contacts are free and clear of debris.
