![background image](http://html1.mh-extra.com/html/pag/mini-paglink-mpl50g/mini-paglink-mpl50g_user-manual_3235774014.webp)
7. Run-Time, Capacity & Data
7.1
The Battery Display:
The battery is able to display a numeric run-time prediction against
load, and charge status as a percentage.
When connected to a camera that is turned-on,
two presses of the battery’s display button will
show a predicted
run-time
against the given
load, expressed in hours and minutes. When
batteries are linked the run-time displayed
relates to the
total
for the connected
batteries.
A single button press of the display, off or
on-load, shows a percentage figure of
available capacity
. When the batteries are
linked this figure still relates to the battery’s
individual capacity.
When individual battery capacity drops below
5% the display will indicate that the battery
should be charged, as shown.
When the battery is fully charged the display
will indicate 100%.
7.2
Display Data Output:
Data stored in the battery’s microprocessor can be revealed using the
battery display:
Press display button
x3 in 1 sec intervals &
hold for data mode
Release to see 1st
menu item: ‘Pd’
(voltage)
Press & hold for
3 seconds to see
voltage reading
Press without holding
for 2nd menu item
Press & hold for temp-
erature in degrees
celsius
Press twice
without holding
for 3rd menu item
Press & hold for
number of charge/
discharge cycles
14