Opening a Saved Personality
To open a previously saved personality:
(1)
From the programming menu, select File, then Open.
(2)
Select one of the personality files and click on Open.
Loading a Personality into the Radio
Use the following procedure to load a personality into the radio:
(1)
Switch off the laptop (or PC) and the radio.
(2)
At the radio, disconnect the microphone from the transceiver. Replace it with
the programming lead.
(3)
Connect the other end of the programming lead to the laptop's (or PC's) Com
port 1 or Com port 2. Note that the appropriate port is set in the personality.
The connected port must match that stated in the personality. Check, and
amend if necessary,
(4)
Switch on the radio and the laptop. At the radio check that Pr is shown on the
front panel display.
(5)
Ensure the programming software is running and display the required
personality on screen.
(6)
From the programming menu-bar select ‘Program radio’ and then
‘Personality’.
The programmer automatically verifies the personality is valid and downloads it to the
radio. If it is not valid the nature of the error will be displayed. The progress of the
programming operation is displayed on the status line at the bottom of the programming
screen.
When programming is complete, switch off the radio and laptop, remove the
programming lead, and reconnect the radio's microphone.
Reading a Personality from the Radio
To read a personality from the radio:
(1)
Switch off the laptop (or PC) and the radio.
(2)
At the radio, disconnect the microphone from the transceiver. Replace it with
the programming lead.
(3)
Connect the other end of the programming lead to the laptop's (or PC's) Com
port 1 or Com port 2. Note that the appropriate port is set in the personality.
The connected port must match that stated in the personality. Check, and
amend if necessary.
T6M User Guide
Page 43