
1-800-263-9768 www.paderno.com
Product No. 043-2737-4
12
13
Cleaning Your Espresso Maker
1.
Always disconnect the appliance
from the power outlet before
cleaning. NEVER immerse the cord,
plug or unit in water or liquid.
2.
Wash all removable parts in water
and mild soap. Rinse them with
water. The Milk Jug, Drip Tray and
Drip Tray Cover are dishwasher safe.
NOTE: To quickly clean the Portafilter
and filter basket, secure the
Portafilter to the Espresso Machine
without grounds and run the Single
Shot function for a couple seconds.
3.
Wipe the exterior of the Espresso
Machine with a soft, damp cloth to
remove stains.
NOTE: DO NOT use alcohol or
solvent-based cleaners.
4.
Dry all parts after cleaning.
Cleaning the Steam Wand
1.
Place a container under the
Steam Wand.
2.
Rotate the Dynamic Control Dial to
the Steam function.
3.
Press the Start Button to run the
Steam function for a few seconds.
4.
Rotate the Dynamic Control Dial to
Standby to turn the Steam function off.
5.
Carefully wipe the Steam Wand with
a wet sponge to remove milk residue
from the outside of the wand.
Removing Mineral Deposits
In order to ensure the Espresso Machine
continues to be used regularly, and the
internal water channels are kept clean to
preserve the taste of the espresso, it is
recommended to descale after every 2-3
months of use.
1.
The best time to descale is after
using the Steam function. There is
less water in the boiler at this time
which is better for the descaling.
2.
Fill the Water Reservoir with water
and descaler to the maximum level
as indicated on the Water Reservoir
(the scale of water and descaler is
4:1, the detail refers to the instruction
of the household descaler).
3.
Select the Hot Water function and
run the appliance. Once water is
flowing out of the Steam Wand, turn
the Dynamic Control Dial back
to Standby.
4.
Let the appliance sit for 15 minutes.
5.
After 15 minutes, run the Hot
Water function again and wait until
approximately 500 mL (17 fl oz) of
hot water is dispensed from the
Steam Wand. Return the dial to
Standby Mode.
6.
Let the appliance sit for another
15 minutes.
7.
Repeat steps 3–6 three times or until
the Water Reservoir is empty.
8.
After the Water Reservoir is cleaned,
fill it with clean water and run the
Hot Water function one more time
to rinse out any remaining
descaling solution.
Disposal of Appliance
DO NOT dispose of this product in
household waste. Dispose of as per the
requirements of your local municipality.
Cleaning and Maintenance
Problem
Possible Solution
Start Button, Manual
Button and Dynamic
Control Dial are flashing.
Reservoir is out of water. Fill the reservoir up with water to
continue to use the machine.
All Buttons and Dynamic
Control Dial are flashing.
Machine has overheated and entered relief mode. Rotate
the Dynamic Control Dial back to Standby and press the
Power Button to turn off the machine. Wait 30 minutes
before turning the machine back on.
Espresso does not brew.
Check the unit is plugged in and powered on. Check
there is water in the Water Reservoir. Espresso grounds
are too fine or too tamped in the Portafilter, water can’t
move through the beans in the Portafilter. Refill basket
with new grounds and tamp with less pressure before
trying to brew again.
Espresso leaks out the
side of the Portafilter.
Check that the Portafilter is locked correctly by rotating
it counter-clockwise to the lock position on the Espresso
Machine. Clean the Portafilter. Fill the basket with less
espresso grounds.
Espresso brews
too quickly.
Espresso grounds are not fine enough or not tamped
enough. Refill basket with new grounds and tamp with
slightly more pressure before trying to brew again.
Espresso tastes weak.
Use Dual Wall Pressurized Filter Basket. Use a finer grind
of espresso.
No steam is generated.
Check there is water in the Water Reservoir. Rotate
the knob to the Standby position for approximately 35
seconds. Turn the Dynamic Control Dial back to the Steam
function and try again. Refer to Cleaning and Maintenance
section to clean the Steam Wand.
Milk is not
frothed enough.
Let milk cool before steaming. Submerge the Steam Wand
under the surface of the milk and run Steam function until
the desired temperature and consistency is reached.
Troubleshooting
w03b_0432737_4_EspresssoManual_ENG.indd 12-13
2020-10-15 11:30 AM