page
6
Paddle Palace H2W Touch Pro Robot
User Manual
How To Position the Table Tennis Robot
1. Clamp the net supports to both
sides of the table near the net.
2. Put both end sleeves of the ball
collection net on the net supports.
3. Buckle the rubber rings are to the
outsides of the net support.
4. Clamp the LCD Panel support to the edge of the table and
insert the Touchscreen LCD Panel into the support. Remove
the protective film before operating the panel.
The robot is powered by
standard US home current
(120V). Make sure the
power cord is securely
plugged in. On/Off switch
is located on the backside
of the robot. Turn off and
unplug the robot when
not in use.
5. Picture of a completed
installation.
6. After training, fold back
the ball collection net in
a reverse order of the
original process, lock the
buckles, and store in any
suitable place.
The Power Supply
6
5
1
2
3
4