page
10
Paddle Palace H2W Touch Pro Robot
User Manual
Custom Sequences / Built-In Sequences
General Settings
C
Picture 16:
Function Setting of Serve
Order
C
Picture 15:
Built-In Sequences
Built-In Sequences
Press the
Built-In Sequences
button on the main menu.
The Built-In sequence selection screen will appear (picture 15). There are
a total of 30 numbered sets of pre-programmed sequences. Sequences
1-10 are the easiest; 11-20 are harder; and 21-30 are for the more
advanced player.
Off
means no setting will be applied.
Built-in sequences all have default settings and the landing spot, spin, long/
short ball, and serve count are pre-set. If you need to modify the Built-in
sequence, press the
Change Confirm
button to load that sequence to the
Function setting screen (Picture 16). You can now make changes on each function.
There is a possibility that one or more shots of a built-in sequence might
be errant. During play, when that shot occurs, hit the adjust button
(Picture 10 on page 9) and alter settings (wheel speed and loop level), to
make the shot perform properly.
The modified Built-In sequences can only be used temporarily. When you
exit the sequence or press the
RESET
button, the modified setting will be
erased and the settings will revert to the factory default settings.
See page 14 of this manual for the 30
Built-In Sequence
configurations.
Reset Default
General Settings
Press the
Settings
button on the
main menu.
The Setting screens will appear
(pictures 17, 18, 19, 20). From this
menu you can adjust the:
P
Volume
(this model does not
have Volume control function)
P
Screen brightness
P
Language (English, Simplified
Chinese, or Traditional Chinese)
P
Time
All changes will be applied when you
press the
BACK
button and return to
the main menu.
Reset Default
Press the
RESET
button on the Main Menu. The reset screen will appear
(Picture 21). Press
YES
button to restore all settings to the factory default.
WARNING:
when you press the
YES
button, all settings in the Custom sequence,
modified Built-In sequence, and Landing Spots/Functions will be cleared. The
robot beeps several times when it has finished the process of resetting.
C
Pictures 17-20:
Volume, Brightness, Language, Time
C
Picture 21:
Reset Screen