page
11
Paddle Palace H2W Touch Pro Robot
User Manual
Robot Maintenance
P
ELECTRONICS:
The robot’s
electric components are
located in the machine’s
circuit board and the control
box. Therefore, you should
be careful to avoid dropping
either component or avoid
any activity that would cause
damage to the internal
electronic units of one or both
of these components. Keep
liquids away from its surface,
in order to prevent damage to
internal electronic units.
P
MECHANICS:
The robot’s
mechanical components are
located in the mechanisms that
produce the ball service and
delivery. Special attention should
P
CLEANING THE ROBOT:
Keep the table tennis robot clean. The top and
bottom friction wheels may become dirty after long use. To ensure a
quality serve, please clean the wheels often with a damp towel (
picture 5
).
Always turn off the robot’s power before cleaning. Under normal
conditions, the top and bottom friction wheels are able to work for 5000
hours or longer before they need to be replaced. When performing the
replacement, power off the robot, remove the protective cover
(
picture 6
) and remove the screws from the friction wheel with a
screwdriver (clockwise to tighten, counter-clockwise to loosen) (
picture 7
).
be paid so that no foreign objects are put into the ball container. Foreign
objects will block the robot’s delivery wheel and result in damage to the robot.
P
REMOVING FOREIGN OBJECTS:
There is a view window fixed under the
removable door. You can open the removable door (
picture 1
), remove
the transparent guard plate (
picture 2
), and take out any foreign objects
(
picture 3
) that have entered, thus returning the robot to its normal
operation.
P
POKE BAR:
When the poke bar inside the ball container (
picture 4
) has
worked for a long time, it should be checked for loose screws so as to
prevent any trouble that would lead to an irregular ball delivery.
1
2
3
4
Do not use force
to adjust the direction
of the shooting head, so as to prevent
damage to the internal parts.
During an operation and/or transportation,
protect the robot against any strong
impact or oscillation. Turn off the power
and unplug the robot after you finish using
the robot.
5
6
7