5S-P-003
Program Writer
© Copyright 2022, PADAUK Technology Co. Ltd
Page 19 of 34
5S-P-003-UM-EN-V007
– Oct. 14, 2022
Note 1: If the pin does not exist, fill in 32
representing NC (no connect)
Note 2: If the pin does not exist or cannot do O/S test (i.e. Special multi-chip package pin), set the
corresponding bit value to zero.
5.2. Connecting Board making
The JP7 last 8 pins are writing pins, as shown in the following figure:
While making a Connecting Board, please decide the IC placement position (generally assumed that the first pin
of IC is aligned with the upper left first pin of the Socket.) and
connect the last 8 pins of Connecting Board with
the corresponding pin of IC, as shown in the following figure:
