Pact MKIV XP Скачать руководство пользователя страница 16

Страница: 16 / 16

an accurate reading. If, on the other hand, the light level increases as the bullet crosses the

skyscreen, you will probably get no reading at all.

If you ﬁnd that your MKIV XP is having trouble getting readings on a sunny day with a dark blue

sky you should try shooting lower over the skyscreens. You may eliminate the problem by

changing the light conditions just a bit by tilting your Skyscreens or changing the direction of the

sun. You will ﬁnd the MKIV XP will operate in very low light conditions, but a some point there

will not be enough light to see the bullet.

Muzzle Blast:

When you ﬁre a supersonic round the bullet gets to the skyscreen before the blast does. Keep

the muzzle a 5-10 ft. back from the ﬁrst skyscreen to keep from beating it up. Remember that

the farther your screens are from the muzzle the lower the velocity your chronograph will read

(the bullet starts slowing down as soon as it leaves the barrel).

If you ever have a problem with your MKIV XP that you can't resolve please don't suffer in

silence! Go to our support section of our website at

https://pact.com

or shoot us an email to

[email protected]

WARNING : Shooting is dangerous. It is up to you to conduct yourself in a safe manner at

all times following established procedures as outlined by Firearms and Ammunition

manufacturers. Failing to do so may result in the death or severe injury of yourself and

others, as well as earning you a place in the Darwin Awards.

DON'T BE A DUMB ASS!

ALWAYS WEAR EYE PROTECTION!

GOOD LUCK AND GOOD SHOOTING!

Содержание MKIV XP

















Результаты поиска

Содержание MKIV XP

Отзывы:

Похожие инструкции для MKIV XP

Бренды по названию

Популярные бренды

Pact MKIV XP, Руководство пользователя

Результаты поиска

Содержание MKIV XP

Отзывы:

Похожие инструкции для MKIV XP

Бренды по названию

Популярные бренды