PACOM PDRH-440, Руководство пользователя

Страница: 26 / 70

User’s Manual
18
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network administrator.
Highlight the box beside DNS Server . Press the Up and Down arrow buttons to set the IP address of the DNS server.
Highlight the Port Number Setup… box and press the button. The Port Number Setup screen appears.
NOTE: You will need to get the appropriate Port Numbers for each RAS and WebGuard related program (Admin,
Callback, Watch, Search and Audio) from your network administrator.
NOTE: Do NOT use the same port number for two different programs, otherwise, the DVR cannot be connected
with the PC running RAS or WebGuard.
CAUTION: When changing the port settings, you must change the port settings on the PC running
RAS or WebGuard as well. Refer to the RAS manual for details.
NOTE: If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might change whenever
the unit is turned on.
Highlight the
DVRNS
tab, and the
DVRNS
setup screen displays.
Change the numbers by highlighting them and using the Up and Down arrow buttons
to increase or decrease the number. The factory default Port settings are:
Remote Admin: 8200
Remote Callback: 8201
Remote Watch:
8016
Remote Search: 10019
Remote Audio: 8116
Selecting DHCP from the Type and highlighting Save
button reads the current IP address of the DVR configured
by DHCP (Dynamic Host Configuration Protocol) network.
Selecting ADSL (with PPPoE) allows you to set up the ADSL
network.
Highlight the box beside ID and press the button. A virtual
keyboard appears allowing you to enter the ID for ADSL
connection.
Highlight the box beside Password and press the button.
A virtual keyboard appears allowing you to enter the password
for ADSL connection.
NOTE: Entering the ID and Password and highlighting OK
reads the current IP address of the DVR configured by the
ADSL network.