manualshive.com logo in svg

PACOM PDR-4L, Руководство пользователя

Приобретите PACOM PDR-4L и воспользуйтесь бесплатным руководством пользователя. Скачайте его с manualshive.com для подробных инструкций по использованию продукта. Не упустите возможность загрузить полезное пособие для настройки и эксплуатации этого устройства.

Поделиться
Скачать
background image

User’s Manual 

iv 

 

 

CAUTION 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

 

 

 

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED   

SERVICE PERSONNEL.

 

 

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to 
the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock. 

The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the literature accompanying the 
appliance 

 

COMPLIANCE NOTICE OF FCC: 

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, 
PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION 
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS 
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED 
IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO 
COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL 
INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN 
EXPENSE. 

CAUTION:

 CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR 

COMPLIANCE COULD VOID THE USER? AUTHORITY TO OPERATE THE EQUIPMENT. 
THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING 
EQUIPMENT REGULATIONS 
THE INTERNAL MODEM OF THIS EQUIPMENT COMPLIES WITH PART 68 OF THE FCC RULES. ON THE BOTTOM OF THIS 
EQUIPMENT IS A LABEL THAT CONTAINS, AMONG OTHER INFORMATION, THE FCC REGISTRATION NUMBER, RINGER 
EQUIVALENCE NUMBER(REN), AND USOC JACK TYPE FOR THIS EQUIPMENT. YOU MUST, UPON REQUEST, PROVIDE 
THIS INFORMATION TO YOUR TELEPHONE COMPANY. THIS EQUIPMENT IS DESIGNED TO BE CONNECTED TO THE 
TELEPHONE NETWORK OR PREMISES WIRING USING A COMPATIBLE MODULAR JACK WHICH IS PART 68 COMPLIANT. 
THE REN IS USEFUL TO DETERMINE THE QUANTITY OF DEVICES YOU MY CONNECT TO YOUR TELEPHONE LINE AND 
STILL HAVE ALL OF THOSE DEVICES RING WHEN YOUR TELEPHONE NUMBER IS CALLED. IN MOST, BUT NOT ALL 
AREAS, THE SUM OF THE REN’S OF ALL DEVICE CONNECTED TO ONE LINE SHOULD NOT EXCEED FIVE(5.0). TO BE 
CERTAIN OF THE NUMBER OF DEVICES YOU MAY CONNECT TO YOU LINE, AS DETERMINED BY THE REN, YOU 
SHOULD CONTACT YOUR LOCAL TELEHONE COMPANY TO DETERMINE THE MAXIMUM REN FOR YOUR CALLING AREA. 
IF YOUR TELEPHONE EQUIPMENT CAUSES HARM TO THE TELEPHONE NETWORK, THE TELEPHONE COMPANY MAY 
DISCONTINUE YOUR SERVICE TEMPORARILY. IF POSSIBLE, THEY WILL NOTIFY YOU IN ADVANCE, BUT IF ADVANCE 
NOTICE IS NOT PRACTICAL, YOU WILL BE NOTIFIED AS SOON AS POSSIBLE. YOU WILL BE INFORMED OF YOUR RIGHT 
TO FILE A COMPLIANT WITH THE FCC. YOUR TELEPHONE COMPANY MAY MAKE CHANGES IN ITS FACILITIES, 
EQUIPMENT, OPERATIONS OR PROCEDURES THAT COULD AFFECT THE PROPER FUNCTIONING OF YOUR 
EQUIPMENT. IF THEY DO, YOU WILL BE NOTIFIED IN ADVANCE TO GIVE YOU AN OPPORTUNITY TO MAINTAIN 
UNINTERRUPTED TELEPHONE SERVICE. IF YOU EXPERIENCE TROUBLE WITH THIS TELEPHONE EQUIPMENT, PLEASE 
CONTACT YOUR DEALER / INSTALLER FOR INFORMATION ON OBTAIN SERVICE OR REPAIRS. THE TELEPHONE 
COMPANY MAY ASK THAT YOU DISCONNECT THIS EQUIPMENT FROM THE NETWORK UNTIL THE PROBLEM HAS BEEN 
CORRECTED OR UNTIL YOU ARE SURE THAT THE EQUIPMENT IS NOT MALFUNCTIONING. THIS EQUIPMENT MAY NOT 
BE USED ON COIN SERVICE PROVIDED BY THE TELEPHONE COMPANY. CONNECTION TO PARTY LINES IS SUBJECT TO 
STATE TARIFFS. 
NOTE: THE INTERNAL MODEM IS OPTIONALLY AVAILABLE FOR THE NETWORK-SUPPORTED PREMIUM MODEL.

 

 

THE INFORMATION IN THIS MANUAL IS BELIEVED TO BE ACCURATE AS OF THE DATE OF PUBLICATION. IDIS, CO., IS NOT 
RESPONSIBLE FOR ANY PROBLEMS RESULTING FROM THE USE THEREOF. THE INFORMATION CONTAINED HEREIN IS SUBJECT TO 
CHANGE WITHOUT NOTICE. REVISIONS OR NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH CHANGES. 

Содержание PDR-4L














































































Отзывы:

Нет отзывов

Похожие инструкции для PDR-4L

Pace TDC577X Operator'S Manual preview
TDC577X
Бренд: Pace Страницы: 40
Dedicated Micros NetVu Connected DS2 Addendum preview
NetVu Connected DS2
Бренд: Dedicated Micros Страницы: 4
Electronics123 DVR603-12 Manual preview
DVR603-12
Бренд: Electronics123 Страницы: 6
Qvis LX Apollo series Quick User Manual preview
LX Apollo series
Бренд: Qvis Страницы: 15
e-Line Technology HDCVI Series User Manual preview
HDCVI Series
Бренд: e-Line Technology Страницы: 147
Stack DVR2-130 User Manual preview
DVR2-130
Бренд: Stack Страницы: 55
Grandstream Networks GVR3550 User Manual preview
GVR3550
Бренд: Grandstream Networks Страницы: 76
Bolide SVR9000S-T4MO User Manual preview
SVR9000S-T4MO
Бренд: Bolide Страницы: 34
Toshiba D-RW2 - DVD Recorder With TV Tuner Specifications preview
D-RW2 - DVD Recorder With TV Tuner
Бренд: Toshiba Страницы: 2
Toshiba HDR5010KB Owner'S Manual preview
HDR5010KB
Бренд: Toshiba Страницы: 48
Toshiba D-R265SE Service Manual preview
D-R265SE
Бренд: Toshiba Страницы: 41
Toshiba D-R410KU Service Manual preview
D-R410KU
Бренд: Toshiba Страницы: 66
Toshiba D-R560KU Service Manual preview
D-R560KU
Бренд: Toshiba Страницы: 72
Toshiba DR20KB Owner'S Manual preview
DR20KB
Бренд: Toshiba Страницы: 76
Toshiba HDS-M5100 series User Manual preview
HDS-M5100 series
Бренд: Toshiba Страницы: 103
Toshiba IPR16-X User Manual preview
IPR16-X
Бренд: Toshiba Страницы: 111
Toshiba DR430KU Owner'S Manual preview
DR430KU
Бренд: Toshiba Страницы: 109
Toshiba D-R420KU Owner'S Manual preview
D-R420KU
Бренд: Toshiba Страницы: 110

Бренды по названию

Популярные бренды

Загрузить еще бренды