PACOM PDR-4L Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 77

PACOM PDR-4L Скачать руководство пользователя страница 18

User’s Manual

8

Left-Arrow Button

•

Plays the images backward. Subsequent selection toggles the 1x/2x/8x backward play
speed.

•

Navigates through menus and GUI during system setup.

•

Pans the PTZ camera to the left in the PTZ mode.

Right-Arrow Button

•

Plays the images forward. Subsequent selection toggles the 1x/2x/8x forward play speed.

•

Navigates through menus and GUI during system setup.

•

Pans the PTZ camera to the right in the PTZ mode.

USB Port

•

A USB port is provided to connect external hard disk drives for archiving video. Position
the external hard disk drive close enough to the DVR so that you can make the cable
connections usually less than 6 feet. Use the USB cable provided with the hard disk drive
to connect it to the DVR.

2.4 Turning on the Power

The DVR is operational in approximately 30 seconds after the power cable is connected to the
DVR. The Power LED on the front panel will turn ON, and this action signifies the DVR
has been turned on properly.

2.5 Turning off the Power

The DVR may be powered down by unplugging the power cord at the rear of the DVR. No
on/off switch is provided.

2.6 Factory Reset

CAUTION: When factory reset is launched, all previously recorded data will be deleted
and all programming configurations will be reset as the factory default setting.

1. Remove power from the DVR and reapply. When the power is reapplied, all front panel

LEDs will illuminate.

«
...
16
17
18
19
20
...
»

Содержание PDR-4L














































































Отзывы:

Нет отзывов