6
Setting Extension Number and Name
1.
Press the [Menu] button, then press
Enter
or [1] button.
2.
Use the keypad to enter extension number, then press
Save
.
3.
Use the keypad to enter extension name. You can program the name for this
extension using the telephone keypad. When a telephone button is pressed
during programming, a number or character is displayed alternatively in the
following order:
Press [Save] button to store the extension number and name.
Selecting Ringing Tone
You can select one of four ringing tones for this tele-
phone:
1.
Press the [Menu] button followed by the
[4] button.
2.
The phone rings with the Ring Tone 1 for about
2 seconds.
3.
Press the [Save] button to select the Ring Tone
1; or
4.
Press the
button or the
button to select another ringing tone.
5.
After the end of the desired ringing tone, press the [Save] button to select the
ringing tone.
Clearing Message Waiting Indicator
To Clear Message Waiting indicator.
Note:
Only used in the event the Mess
a
ge W
a
rning Indic
a
-
tor does not go
a
w
a
y
a
fter checking voicem
a
il.
Adjusting the Display Angle
You can optimize the LCD display by adjusting the
viewing angle. To adjust the LCD viewing angle,
move the top edge of the LCD module up or down.
1: ‘().1
2: ABCabc2
3: DEFdef3
4: GHIghi4
5: JKLjkl5
6: MNOmno6
7: PQRSpqrs7
8
: TUVtuv
8
9: WXYZwxyz9
*: *
0: space
#: #
Use Save to End
Use / /Enter To Select
1= Ring Tone 1
2= Ring Tone 2
3= Ring Tone 3
4= Ring Tone 4
Clearing Message Indicator
Use / /Enter To Select
1= Clear Message Indicator
2= No
