Packet Power E306-0000, Руководство по установке

Страница: 16 / 21

© 2014 Packet Power LLC www.packetpower.com EM31.2
16
DRY CONTACT SENSING
The E306 monitors can be used to sense the status of dry contact circuits (i.e. open or closed status)
using any of the temperature probe ports. Consult with Packet Power on how to configure your devices
for dry contact closure. Consult Packet Power when using the device for dry contacts.
DISPLAY AND COMMUNICATIONS
LCD DISPLAY : The E306 monitor includes a local LCD display that will indicate the device status, and
input measurements in a rotation indicated in the chart below:
Display Description Display
COM: Communications status (indicates if the
device is properly communication with
the gateway) [NONE] / [OK]
0: Internal temperature sensor
[XX.X C]… [XX.X F]
1-6: Probe 1-6 status; either temperature
measurement or dry contact status when
used as dry contact input
[XX.X C]… [XX.X F]
OR [OPEN] OR
[CLOSED]
RH: Relative humidity (only on monitors
equipped with relative humidity) [XX %]
DP: Differential pressure (only on monitors
equipped with differential pressure) [XXX P]
LED DISPLAY AND CONTROL BUTTON (E312 Monitor)
The E312 monitor includes a local LED display that will indicate the device status as well as battery status.
AC Power Mode
Function Description LED Slow Blink LED Fast Blink
Green LED 800/900MHz active, not connected connected
Red LED 2.4GHz active, not connected connected
Battery Mode
Function Description LED Slow Blink LED Fast Blink
Red LED 2.4GHz active,
searching/measuring transmitting
E306 LCD Display