Packard Bell iDesign Series, Руководство по разборке

Страница: 8 / 13

Note
Depending on the motherboard (revision), you might
encounter an AGP slot with a special retention lock. Unlock the card
before taking it out from the AGP slot.
Fig. 13: AGP retention lock
Removing the SPDIF Assembly (If Present)
To remove the SPDIF card, open the chassis (see section Opening the
Chassis ), then:
1. Disconnect the SPDIF assembly cable from the
motherboard.
Fig. 14: Disconnecting SPDIF assembly cable
2. Remove both screws holding the SPDIF assembly to the
back panel of the chassis and take out the SPDIF
assembly.
Fig. 15: Removing SPDIF assembly from chassis
Removing the Switch/USB Assembly
To remove the switch/USB assembly, open the chassis (see
section
Opening the Chassis ), remove the front bezel (see
section Removing the Front Bezel) , remove the drive bracket
containing the DVD/CD-ROM and floppy disk drive (see the
section
Removing the Drive Bracket ) then:
iDesign Disassembly Manual - 8