Packard Bell iDesign Series, Руководство по разборке

Страница: 4 / 13

Fig. 3: Removing the side panel
5. If required, do the same with the other side panel.
6. If required, lay down the chassis on one side, carefully
slide the top bezel slightly backwards to unhook the
latches holding it in place, and lift the top bezel away from
the chassis.
Fig. 4: Removing the top bezel
7. If required, lay down the chassis on one side, carefully
slide the bottom bezel slightly backwards to unhook the
latches holding it in place, and remove the bottom bezel.
Fig. 5: Removing bottom bezel
Removing the Front Bezel
To remove the front bezel, open the chassis (see the section
Opening the Chassis ) and continue as follows:
1. Gently unlock the three lateral latches that hold the front
bezel and pull it away to the opposite side.
iDesign Disassembly Manual - 4