Packard Bell iDesign Series, Руководство по разборке

Страница: 7 / 13

Fig. 10: Removing the screws of the hard disk drive bracket
3. Slide the hard disk drive bracket out of the chassis.
4. Remove the screws that hold the hard disk drive in the
bracket and slide the hard disk drive out.
Fig. 11: Removing the hard disk drive screws
Removing Add-On Cards
To remove installed add-on cards, open the chassis (see
section
Opening the Chassis ), and follow these steps:
1. Disconnect all cables from the card to be removed.
2. Remove the screw holding the card in place.
Fig. 12: Removing the add-on cards
3. Carefully take out the card from the slot.
iDesign Disassembly Manual - 7