Pacific Proteus 210E Скачать руководство пользователя страница 14

 

 

08/2006 

Page 14 of 14 

PN 865621 

 

 
 

 

WARRANTY POLICY 

PACIFIC LIMITED WARRANTY

 

 

The 

Pacific

 Proteus 210E has been manufactured, tested and inspected in accordance with specific 

engineering requirements.  This machine is WARRANTED to be free from defects in workmanship and 
materials for periods as follows from the date of purchase. 
 
Ten (10) Years Parts, One (1) Year Labor – Polyethylene Components 
Five (5) Years Parts, One (1) Year Labor – Main Frame 
Two (2) Years Parts, One (1) Year Labor – Brush Drive Motors 
One (1) Year Parts & Labor – All other components unless excluded below 
 
Travel time for warranty repair is authorized for a period of ninety (90) days following the date of sale to the 
end user, with a maximum of three (3) hours per claim. 
 
This warranty extends to the original user/purchaser and only when used, operated and maintained in 
accordance with 

Pacific

 Operating and Maintenance instructions. 

 
This warranty does not apply to certain wear parts and accessories of the machine such as electrical cords, 
carbon motor brushes, floor brushes, belts, hoses, tools, squeegee blades, etc., nor does it apply to damage 
or failure caused by improper use, abuse or neglect.  Warranty credit of return parts including motors, pumps, 
etc., is subject to incoming inspection of those items. 
 
To secure repair under this warranty, the following procedure should be taken: 

1. 

After the expiration of the ninety (90) day travel time warranty period, the customer is responsible for 
warranty travel payment for the inoperative machine or warranted parts must be delivered to the authorized 
dealer with shipping and delivery charges prepaid.  If unable to locate the Dealer, you may contact 

Pacific

 

at the address listed herein for the location of the nearest 

Pacific

 repair center or agent or for other 

instructions pertaining to your warranty difficulty. 

2. 

Upon compliance with the above warranty procedure, all warranted repairs will be completed at no 
additional charge or cost to the user. 

3. 

Only 

Pacific

 or its authorized dealers and agents may make no charge warranty repairs on this product.  

All others do so at their own risk. 

 
This warranty limits 

Pacific

 liability to the repair of the product and/or warranted parts replacement and does 

not include incidental or consequential damages arising from the use of a 

Pacific

 machine whether defective 

or not. 
 
 
This warranty is in lieu of all other expressed or implied warranties and is extended to the original 
purchaser/user.

 

Содержание Proteus 210E















Отзывы: