background image

3

3

1

5

4

2

    Show the 
Speeds & Timer

Hour

Minute

Operating Instructions

16

www.2pacific.com

When approaching the hood while it is powered off, the clock will illuminate. 

If neither the fan nor lights are turned on within 60 seconds, the clock will turn off.

The icons will not disappear until the fan and lights are turned off.

Press          to power on or off the fan, lights and deflect panel.
The hood has a memory function to remember the last used settings for the fan and lights.
Lock Screen :    
While the fan is off, press and hold the            for 3 seconds, and all the icon will be dim, the dimming icon 
means the control is lock. 
The purpose of this function is to clean the control easily. 
Press and hold the           for another 3 seconds until the icon turn lighter indicates that the lock function is 
on unlock the screen.

Press the           to change lighting level from 2, 1, off.

Press         to increase fan speed from off, 1, 2, 3, 4 .
If hood is Off and          is pressed, fan will turn on Speed 1.

 
Press         to decrease fan speed from 4, 3, 2, 1, off.
If fan is on Speed 1 and            is pressed, fan will power Off.
   

When ACT is enabled, the fan speeds will be reduced as follows:
(1)390 CFM 
(2)290 CFM 

 
While the fan is on, press         to enable the delay off timer, it provides the options for either 3 or 5 minutes, 
press          one time for 5 minutes, press            again for 3 minutes, the delay off timer will automatically 
operate after 3 seconds when the timer is selected. 
The fan will  change to speed 1, and the timer will begin counting down from 3 or 5 minutes. After the timer 
reaches  00:00, the fan and lights will power off.
When delay off timer is operating,          and          are available.

PROXIMITY SENSOR

On/Off

1.

2.

Light

 Fan down

4.

Delay off

3.

Speed Selection Button

 Fan up

ACT Enabled Speed Selections

Содержание PQ6830AB













































Отзывы: