Pacific Floormaster 18B, Инструкция по эксплуатации и обслуживанию

Страница: 11 / 20

11
OPERATION
OPERATING
1. Connect the machine connector (1) to the battery connector.
2. Turn the key (2) clockwise to ON. The green signal light will come on (3) indicating
the batteries are charged (if blinking, the batteries need to be charged).
3. Press the solenoid valve switch (4).
4. Press the vacuum motor switch (5).
5. Press the brush motor switch (6).
6. Adjust the amount of cleaning solution through the lever (1). There should be
enough solution to wet the floor uniformly, but not so much that it gets past the
splash guard. Remember that the correct solution quantity depends on the type of
floor, the dirt and the speed.
7. Release the lever (2) and lower the brush base.
8. Lower the squeegee using lever (3).
9. Check that the parking brake (4) is released.
1
0. The machine will move by pushing the lever (1) on the handle bar forward. During
the first few yards of operation, check that the quantity of the cleaning solution is
sufficient and that the squeegee dries the floor surface.