User Manual
PW-FE1-4Eth
E1-Ethernet Converter
www.pacificwave-wireless.com
Page 9 of 16
4.2.2. The rear panel of the
FE1-4ETH
bridge
T
he AC input rear panel of FE1-4ETH Bridge is shown in figure 3.
Figure 3 AC input rear panel of FE1-4ETH Bridge
220V AC: AC socket with two cores
OF ON: Power Switch for Electrical Power
8 Bits coded Switch: System configure, more description in 4.2.3
E1-75Ω: BNC Tx/Rx socket for 75ohm impedance E1 interface
E1-120Ω: RJ45 socket for 120Ω impedance E1 interface
ETH: RJ45 socket for 100Mbps Ethernet interface
The DC input rear panel of FE1-4ETH Bridge is shown in figure 4.
Figure 4 DC input rear panel of
FE1-4ETH bridge
48VDC : DC-48Volt Power Supply Connector
The others are the same as in figure 3.
