1.a
Connecting to your computer
Pacific Sun lamps are controlled using a Bluetooth connection between doser and your computer. It is highly recommended that you
use an external Bluetooth adapter to ensure a strong signal between the doser and your computer. Bluetooth adapter should be USB
compatible with Class 1 specification and output power not less than 14dBm-20dBm.
Steps:
1) Enable Bluetooth on your computer (or install external USB Bluetooth adapter)
2) Initiate the Pairing process between your doser and your computer
Tip!
You can do this by going to your
Start
menu, and selecting
Devices and Printers
. Once the window
opens, click on
Add a device
button. Your computer will search for all available devices, and will show the
available Pacific Sun devices. Select your doser and click on
Next
.
3) Select option “
Enter the devices pairing code
”, enter “
1234
” as the pairing code, and click on
Next
. You will receive a
message stating “This device has been successfully added to this computer”.
Tip!
All Pacific Sun devices have the default pairing code of “1234”.
4) You will see the lamp
in your “Device list” now.
Tip!
You can view your Device list by navigating to your
Start
menu, and selecting
Devices and Printers
.
Right click on the discovered lamp
and click on
Properties
5) Click on the
Services
tab, and take note of the COM port that was assigned to your doser
Tip!
You can increase the transfer rate between your lamp and your computer by clicking on the
Hardware
tab, selecting
your COM port, and clicking on
Properties
. In the new dialog, click on the
Port Settings
tab, and change the value of “Bits
per second” field to
19,200
. Click
OK
and then
OK
again.
Using the software
Installation
From CD
1) Insert the CD into your CD-ROM drive
2) Go to
My Computer
or
Computer
, and double click on Pacific Sun CD to explore the contents of the disk
3) Double click on
Setup.exe
and follow the prompts on screen
From Web
1) Download the software
2) Extract the files to a local folder using the RAR Lab WinRAR unpacking tool
3) Browse through the extracted files, locate
Setup.exe
and run it
Tip!
You can also run the software by browsing through the installation disk / extracted folder, and double clicking on the Pacific Sun
application.
Starting the software
The installation creates a shortcut to Pacific Sun software in your
Start
menu. Click on
Start
, and run the Pacific Sun software from
there.
Connecting to your doser
To control your lamp, you will need to connect it to your computer first. (see
Connecting to your computer
for further help with this)
1) Start the software
2) Select the
COM port
for your lamp from the drop down, select
Bluetooth
in the second drop down, and click on
Connect
Tip!
You can also type the COM port in manually in the drop down
Tip!
Refer to
Connecting to your computer
to find the COM port for your lamp
3) If software is unable to connect to doser at first, try a couple more times – you can also try moving closer to the doser for
better signal between the doser and your computer
Once the connection is successfully established, the software will display some basic information regarding your actual doser
settings. Information displayed varies in different versions of software.
General information about Pacific Sun lamps firmware upgrade procedure
Caution: Switching off the power supply during updating process may damage your lamp CPU. Recomended distance between the
lamp nd the computer that you are using to update firmware is between 1-2 meters. If you are using a laptop with bluetooth module
built-in, please use an external USB bluetooth module for better signal strenght.
Bluetooth module Class 1 is strongly recomended.
Pacific Sun Hyperion S/Triton S lamps – manua
