8
Recommended Wiring Installation
DA24L-1600A and DA3444
Infrequent Use with Varying Loads
If the load requirement is not heavy
(intermittent hand tool use or light loads
for a long period of time) the vehicle
battery and charging system should
handle both the vehicle and additional
generator demand.
12 Volt
Battery
Vehicle Batteries
+
–
12 Volt
Battery
+
–
To Vehicle
100 Amp
Fuse
To
Ground
REDI-LINE Generator
–
+
Frequent Use with Varying Loads
If the load requirements are heavy
(constant use of hand tools or large loads)
install two or more deep cycle auxiliary
batteries. The auxiliary battery should be
isolated from the vehicle battery using a
battery isolator. The battery isolator is a
one way path so both batteries are
charged by the vehicle but one battery
cannot discharge the other. This will
ensure the vehicle battery is always
charged and you will be able to start your
vehicle.
100 Amp
Fuse
12 Volt
Battery
+
–
12 Volt
Battery
+
–
Auxiliary Batteries
Vehicle Batteries
To Vehicle
To
Ground
To The
Alternator
Isolator
12 Volt
Battery
+
–
12 Volt
Battery
+
–
REDI-LINE Generator
–
+
Isolator*
Fuse
*Use fuse size recommended
by isolator manufacturer