20
WARNING
Do not use the oven in garages, breezeways, sheds or any enclosed area.
Never operate the oven in enclosed areas as this could lead to a carbon monoxide buildup,
which could result in injury or death. Place the oven on a level surface. Avoid moving the
oven while it is in operation.
PREPARATION FOR NG CONVERSION:
Before beginning conversion, make sure all parts are present. Compare parts with package
contents. If any part is missing or damaged, do not attempt to convert. Contact customer
service for replacement parts.
1. Turn off gas supply, and then remove cap on gas supply side.
2. Recommended: Install a shut-off valve on gas supply side before installing the socket.
3. Socket should be installed by an authorized technician in accordance with the national
fuel gas code (NFPA 54/ANSI223.1).
4. Before inserting plug, turn on gas supply and leak test all connections including the stem
of the shut-off valve and the opening of the socket. For best results, use an ammonia-free
soap and water solution.
NATURAL GAS INSTRUCTION:
1. To connect, push back socket
sleeve (Fig. 1).
2. Insert plug and release sleeve (Fig.
2).
3. Push plug until sleeve snaps
forward (Fig. 3). (Gas will flow
automatically. Failure to connect plug
properly to socket will inhibit gas flow
to the appliance.)
4. Test connection with ammonia-free
soap and water solution.
To disconnect
1. Pull sleeve back. Pull plug out of
socket. (Gas is automatically shut off.)
2. Close shut-off valve and replace
dust caps on socket and plug.
Fig. 3
Socket
Sleeve
Sleeve
Socket
Fig. 2
Fig. 1
Socket
Sleeve
Plug
