SKU 95591/95592/95593
For technical questions, please call 1-800-444-3353
PAGE 4
TOOL USE And CARE
disconnect the Power Cord Plug
1.
from the power source before
making any adjustments, changing
accessories, or storing the Sump
Pump.
Such preventive safety mea-
sures reduce the risk of starting the
unit accidentally.
Store idle equipment out of reach
2.
of children and other untrained
persons.
Electrically-powered prod-
ucts are dangerous in the hands of
untrained users.
Check for misalignment or binding
3.
of moving parts, breakage of parts,
and any other condition that may
affect this product’s operation. If
damaged, have the Sump Pump
serviced before using.
Many ac-
cidents are caused by poorly main-
tained equipment.
SERVICE
Service must be performed only by
1.
qualified repair personnel.
Service
or maintenance performed by unqual-
ified personnel could result in a risk of
injury.
When servicing this product, use
2.
only identical replacement parts.
Follow instructions in the “Inspec-
tion, Maintenance, And Cleaning”
section of this manual.
Use of
unauthorized parts or failure to follow
maintenance instructions may create
a risk of electric shock or injury.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on
1.
the Pump.
These carry important
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
2.
Wear AnSI-approved
safety impact eye gog-
gles when assembling
the Pump.
Using per-
sonal safety devices reduce the risk
for injury. Safety impact eye goggles
are available from Harbor Freight
Tools.
Use the right product for the job.
3.
There are certain applications for
which this product was designed. Do
not use small tools, attachments, or
equipment to do the work of larger in-
dustrial tools, attachments, or equip-
ment.
Maintain a safe environment.
4.
Keep
the area well lit. Make sure there is
adequate surrounding space. Always
keep the area free of obstructions,
grease, oil, trash, and other debris.
Do not use an electrically powered
product in areas near flammable
chemicals, dusts, and vapors.
5.
Risk of electrical shock.
Always disconnect the
Pump from its power
source before handling or
making any adjustments to the tool.
Always wear non-skid rubber boots
when water is on the floor and you
must unplug the Pump. Make sure
the electrical power source is a sepa-
rately fused, grounded, 3-wire type
gFCI
(Ground Fault Circuit Interrupt-
er) outlet.
do not remove the
ground prong on the Power Cord
Plug. do not use an extension
cord.
