background image

SKU 95591/95592/95593         

  For technical questions, please call 1-800-444-3353 

PAGE 3

WORK AREA

Keep your work area clean and 

1. 

well lit.

  Cluttered benches and dark 

areas invite accidents.

do not operate power tools in 

2. 

explosive atmospheres, such as in 

the presence of flammable liquids, 

gases, or dust.  

Power tools create 

sparks which may ignite the dust or 

fumes.

Keep bystanders, children, and 

3. 

visitors away while operating a 

power tool.  

Distractions can cause 

you to lose control.  Children and 

other unauthorized people should not 

be allowed in the work area.

ELECTRICAL SAFETY

grounded tools must be plugged 

1. 

into a gFCI (ground Fault Cir-

cuit Interrupter) outlet, properly 

installed, and grounded in ac-

cordance with all codes and 

ordinances.  never remove the 

grounding prong or modify the 

plug in any way.  do not use any 

adapter plugs.  Check with a quali-

fied electrician if you are in doubt 

as to whether the outlet is properly 

grounded.

  If the tools should elec-

trically malfunction or break down, 

grounding provides a low resistance 

path to carry electricity away from the 

user.

double insulated tools are 

2. 

equipped with a polarized plug 

(one blade is wider than the other).  

This plug will fit in a polarized out

-

let only one way.  If the plug does 

not fit fully in the outlet, reverse 

the plug.  If it still does not fit, con

-

tact a qualified electrician to install 

a polarized outlet.  do not change 

the plug in any way.

  Double insula-

tion   eliminates the need for the 

three wire grounded power cord and 

grounded power supply system.

Avoid body contact with grounded 

3. 

surfaces such as pipes, radiators, 

ranges, and refrigerators.  

There is 

an increased risk of electric shock if 

your body is grounded.

do not abuse the Power Cord.

4. 

  

never use the Power Cord to carry 

the Sump Pump or pull the Plug 

from an outlet.  Keep the Power 

Cord away from heat, oil, sharp 

edges, or moving parts.  Replace 

damaged Power Cords immediate-

ly.

  Damaged Power Cords increase 

the risk of electric shock.

PERSOnAL SAFETY 

Stay alert.  Watch what you are do-

1. 

ing, and use common sense when 

operating this product.  do not use 

the Sump Pump while tired or un-

der the influence of drugs, alcohol, 

or medication.

  A moment of inatten-

tion while operating this product may 

result in serious personal injury.

dress properly.  do not wear loose 

2. 

clothing or jewelry.  Contain long 

hair.  Keep your hair, clothing, and 

gloves away from moving parts.

  

Loose clothes, jewelry, or long hair 

can be caught in moving parts.

Use safety equipment.  Wear AnSI-

3. 

approved safety impact goggles 

when assembling this product. 

 

Non-skid safety shoes must be used 

for appropriate conditions.

Содержание 95591 - .75 HP















Отзывы: