Pacific Helmets HALOFLEX F20H, Руководство пользователя

Страница: 32 / 40

Replacement of other parts:
- We recommend the neck protector be replaced after a maximum of 50
wash cycles, or when there are stubborn stains that cannot be removed
from repeated washings.
- Replace eye protector if badly scratched or deformed by chemicals,
heat, smoke or other pollutants.
- Replace face shield once badly scratched or deformed by chemicals,
heat, smoke or other pollutants.
- Internal Padding can be washed a maximum of 20 cycles. We
reccomend replacing the padding should you notice deformation of the
foam shapes or the material delaminating from the padding. You may
achieve more than 20 wash cycles , but we recommend a thorough
evaluation of the padding to ensure comfort, fit and performance are not
compromised.
If you have any doubts about your protective helmet and its condition,
bring this matter to the attention of your supervisor, department or
organization immediately. Protective helmets that are no longer deemed
serviceable for reasons of damage, contamination, or other unsafe
condition must be disposed of in a fashion whereby they cannot be
reused. One example is drilling holes in the shell, removing the chinstrap
and suspension system, and damaging the tabs for attaching the
headband.
For general disposal, use landfills, incineration and/or other facilities
that are in accordance with your municipal guidelines and regulations.
Contaminated protective helmets must be disposed of by your depart-
ment or organization in accordance with federal, state, or local
regulations.
32
F20 USER INFORMATION GUIDE