Pacific Floorcare RSW28, Руководство по эксплуатации и техническому обслуживанию

Страница: 19 / 28

19
1
4.7. FUNCTIONS
Turn the key to the on position and lower both the side and the central brushes with the brush control levers
(Figure 4.7).
Brushes will start working when forward motion begins. Drive the machine at a consistent speed while
sweeping.
Always keep filter clean to ensure proper operation. Use the filter shaker regularly by using the switch on the
control panel (Figure 4.6).
4.7.1 LEVERS & PEDALS
This machine is equipped with following operational levers:

Accelerator lever located on the right side of the operator control handles. To operate, toggle the
Forward / Reverse switch and slowly squeeze the accelerator using the right hand.

Side brush control lever (picture 4.7 detail 1): push the lever down and the side brush will lower to
the floor.

Central main brush control lever (picture 4.7 detail 2): push the lever down and the central main
brush will lower to the floor.

Flap pedal lever (picture 4.7 detail 3): press the flap lever with the left foot and bottom flap is raised.
3
2
Figure 4.7
Before proceeding with operation, please ensure all guards and protections are installed
and functioning properly.
The accelerator lever starts the vacuum motor and brushes of the RSW28.