10
Figure 3.6
3.5. SAFETY DEVICES
The machine is equipped with the following safety devices.
•
Battery Plug
(picture 3.6), the same plug used for the battery charger. In
case of emergency, this plug must be disconnected by
lifting up on the plug’s
handle.
The operator must be trained about machine safety. Do not restore this safety system before the
problem has been corrected. If it is necessary, ask for a technician
’s help.
Disconnect in case of emergency
3.6. SAFETY DIAGNOSTIC ALERTS
The RSW28 Rider Vacuum Sweeper is equipped with a system that flashes error codes on the battery charge
indicator. The flash series will give the operator an indication of the error and the table below presents a
solution to correct the error.
No. of
flashes
Description
Solution
1
The direction was set to forward prior to turning the
key switch to the on position.
Release the forward setting to stop this
signal. If this does not stop it; it may be
necessary to turn the machine off and
back on.
2
Battery charge levels are too low or improper battery
installed.
Verify the battery charge level. If it is a
low reading, recharge the batteries.
Check that all electric connections are
secure. If the problem is not solved it
might be necessary to replace the
batteries.
Содержание RSW28
Страница 26: ...26 5 5 MAINTENANCE LOG DATE NAME NOTES INITIALS...
Страница 28: ...Date of installation Serial no...