- 6 -
AFTER USE INSTRUCTIONS
1. Flush the unit with fresh water for 5 minutes.
2. Shut off the air supply to the unit by closing the air inlet
valve on the back plate.
3. Turn the power switch OFF to shut off the air
compressor.
4. Unplug the air compressor.
5� Standard PSG-N130 Wand
: Press the red and blue
trigger buttons to relieve any pressure remaining
in
the unit. Once pressure is relieved, release both trigger
buttons.
6� Extended MGA-RAC-N130 Wand:
Open the air
shut-off valve at the trigger gun and squeeze the trigger
handle to relieve any pressure remaining in the unit.
Once pressure is relieved, release the trigger handle and
close the air shut-off valve at the trigger gun.
7. Depressurize and drain the air compressor tank by
opening the ball valve on the compressor tank.