15 GALLON MISTER SPECIFICATIONS
Power Requirements
120 Vac at 60 Hz, 8.5 A (GFCI protected outlet)
Power Cable Length
9 Ft.
Noise Level (dBA)
60
Machine Weight
90 Lbs.
Liquid Temperature Range
40-100° F (4.4-37° C)
Chemical Compatibility
Chemical products used with this equipment must be formulated for the type of
application and compatible with this unit’s materials and pump seals. For more
information on chemical compatibility, consult the manufacturer, SDS for your
product, or our contact customer service department.
Chemical Pickup Type
Draws from pre-mixed solution
Capacity
15 Gallons (56.8 Liters)
Suction Line Diameter
3/8 In. (9.5 mm) inside diameter
Discharge Line Length/Diameter 25 Ft. (7.6 M) coiled twin-line tubing with 1/4 In. (6.4 mm) outside diameter
Discharge Wand/Tip Type
Polypropylene trigger handle with misting nozzle
Output Distance
3-4.5 Ft. (0.9-1.4 M)
Output Volume
8.9 oz/min (263.2 ml/min) at 50 psi (3.4 bar)
Flow Rate*
8.9 oz/min (263.2 ml/min) at 50 psi (3.4 bar)
Pump Seals
Santoprene
Run Time - Full Tank**
Approx. 3.5 hours
Nozzle Type
Pneumatic fog nozzle
Number of Nozzles
1 nozzle
Droplet Size***
15 micron at 50 psi (3.4 bar)
Wheel Type
Two 10 In. (25.4 cm) non-marking wheels
Two 5 In. (12.7 cm) locking casters
* Dilution rates and flows rates given are based on chemical viscosity the same as water and factory air pressure settings.
** Area covered and run time may vary based on humidity, air flow, and product used.
*** Refer to chemical supplier for recommended application for sanitizing and disinfecting efficacy.
