Pacific energy TOFINO i30s Скачать руководство пользователя страница 1

Страница: 1 / 44

WARNING: If the information in these

instructions is not followed exactly a fire

or explosion may result causing property
damage, personal injury or death.

INSTALLER:
Leave this manual with the appliance.
CONSUMER:
Retain this manual for future reference.

This appliance is suitable for installation in a

bedroom or bed sitting room.

This appliance may be installed in an after-

market permanently located, manufactured
home (USA only) or mobile home, where not
prohibited by local codes.

This appliance is only for use with the type of

gas indicated on the rating plate. This appliance

is not convertible for use with other gases
unless a certiﬁed kit is used.

FOR YOUR SAFETY

Do not store or use gasoline or other ﬂammable
vapours and liquids in the vicinity of this or any
other appliance.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical Switch.

Do not use any phone in your building.

Immediately call your gas supplier from a
neighbour’s phone. Follow the gas supplier’s
instructions.

If you cannot reach your gas supplier call the
ﬁre department.

Installation and service must be performed by
a qualiﬁed installer, service agency or the gas
supplier.

TOFINO

INSTALLATION
INSTRUCTIONS

MODEL: TOFINO i30s

TOFINO i30m

(SIT & Maxitrol versions)

SERIES: A

DIRECT VENT GAS INSERT

Visit www.paciﬁcenergy.net for the most recent version of this manual

5055.990-A

130717-44

INSTALLATION INSTRUCTIONS

Содержание TOFINO i30s













































Результаты поиска

Содержание TOFINO i30s

Отзывы:

Похожие инструкции для TOFINO i30s

Бренды по названию

Популярные бренды

Pacific energy TOFINO i30s, Руководство по установке

Результаты поиска

Содержание TOFINO i30s

Отзывы:

Похожие инструкции для TOFINO i30s

Бренды по названию

Популярные бренды