5056.201-A ESPR.BODYA
31
120315-40
INSTALLER
INFORMATIO
N
Log Set Installation / Removal
Figure 47: Two Rear Logs
Figure 48: Rear Log Set
Figure 49: Left Side Log
Figure 50: Front Logs
Figure 46: Log Set
Place the Logs #1 and #2 as seen in Fig.47
than place Log #3 over dowel pin on Log #2 as
seen in Fig.48.
Place Log #6 to the left side seen in Fig 49.
Place side Log #5 and #4 as seen in Fig 50.
Place Log #7 as seen in Fig.51
Complete Log Set should look like it is shown in
Fig 52. Logs should not touch the flame and
overlap pilot or air openings in rock tray.
Figure 51: Middle Log
Figure 52: Complete Setup
