The thermostat key (Figure 1) on the remote handset needs to be held down. Keep it pressed down and
remove one of the three batteries from the remote handset. Simply re-install the battery that was removed
and the feature is activated. Use the same procedure to disable the thermostat function.
Instructions for enabling the Thermostat function for Canadian users.
Figure 8: Key lock icon.
BRSL.BODYB
BDFD.BODYB
Temperature indication Display
With the system in the “OFF” position, press the Thermostat Key and the
Mode Key at the same time. Look at the LCD screen on the transmitter to
verify that a C or F is visible to the right of the Room Temperature display
(Figure 6 and Figure 7).
Turn on the Fireplace
With the system OFF, press the ON/OFF Key on the remote transmitter. The
remote transmitter display will show some other active Icons on the screen.
At the same time the Receiver will activate the Heater. A single “beep” from
the Receiver (module) will confirm reception of the command.
Turn off the Fireplace
With the system ON, press the ON/OFF Key on the Remote transmitter.
The Remote transmitter LCD display will only show the room temperature
(Figure 6 and Figure 7). At the same time the Receiver (module) will turn off
the Heater. A single “beep” from the Receiver confirms reception of the
command.
Manual Bypass of the Remote System
If the batteries of the receiver or remote transmitter are low or depleted, the
Heater can be turned off manually using ON/OFF switch located on battery
box at the rear of the Broadway/Brentwood. This will bypass the remote
transmitter.
Key Lock
This function will lock the keys to avoid unsupervised operation. To activate
this function, press the MODE and UP keys at the same time. The lock icon
will appear(Figure 8). To de-activate this function, press the MODE and UP
keys at the same time.
Figure 6: Temperature in
celcius.
Figure 7: Temperature in
fahrenheit.
9
5055.633-B
050216-44
