Figure 34: Adjustment feet on the bottom rear of
unit.
Figure 35: Releasing door screws.
BRSL.BODYB
BDFD.BODYB
Door Installation/Removal
NOTE:
In the event that the door glass breaks,
The complete door assembly must be replaced.
See “Replacement Parts” on page 39 for the
appropriate part number.
Installation
1. Position the door so that the doors upper
bracket is positioned overtop of the lip on
top of the firebox.
2. Lower the bottom edge of the door and
secure it with 1/4” bolts to the relief arms
as shown in Figure 35.
Removal
1. Locate and remove the two 1/4” bolts
securing the bottom of door as seen in
Figure 35.
2. Tilt the bottom of the door away from the
appliance and lift the door off.
Adjustable leveling bolts
This fireplace comes with two leveling bolts
used to adjust the angle of the front of the
fireplace relative to the wall in which it’s
installed. The bolts are not pre-installed and
can be found in a separate plastic bag. Care
in measuring should be exercised if using
the bolts as the fireplace will be required
to be removed each time an adjustment is
performed.
Adjustable Leveling Bolts
23
5055.633-B
050216-44
