Pacific Crest XDL ROVER 2, Руководство пользователя

Страница: 10 / 24

10 XDL Rover 2 User Guide
Configuring the XDL ROVER 2
Connecting the XDL ROVER 2 to the ADLCONF software
Cable connection
To configure the XDL ROVER 2 using a desktop or laptop computer, use the serial
programming cable, P/N 100948-00. This cable is equipped with a standard DE9 connector
that plugs into a computer’s serial port. If your computer does not have a serial port, you
may use a serial-to-USB adapter.
1. Plug in the LEMO side of the cable into the XDL ROVER 2.
2. Plug the other end of the cable into its corresponding port on your desktop/laptop
computer.
3. Press the power button on the XDL ROVER 2 to turn it on.
4. On the computer, open the ADLCONF software and then connect to the radio through
the appropriate COM port.
For more information on how to use the ADLCONF software, refer to the ADLCONF
Software User Guide. You can download the user guide from
http://www.pacificcrest.com/resources.php?page=doc_library
Bluetooth connection
You can easily configure the XDL ROVER 2 using Bluetooth wireless technology from a
computer enabled with Bluetooth that is running a Windows
®
operating system.
Do the following to set up a Bluetooth connection between your computer and the XDL
ROVER 2 so that you can configure it using the ADLCONF software:
1. Press the power button on the XDL ROVER 2 to turn it on.
2. Press the power button again to turn on the XDL ROVER 2’s Bluetooth connection.
Wait until the Bluetooth LED blinks rapidly.
3. Ensure that your computer is enabled with Bluetooth. This is usually indicated by a
Bluetooth icon on the right-hand side of your taskbar among the icons that list current
running applications.
Note: If you are unable to find the icon, refer to your computer manual on how to enable
Bluetooth technology.