file:///C|/PACH-CO.COM-2018/online_manual/aegis7000s.htm[6/13/2019 7:18:06 AM]
AeGIS 7000S SERIES
If the system is installed behind a Private Branch Exchange (PBX) then 9 is necessary before dialing an outside line. If this function is enabled then the system can
only be dialing an outside line, it can't dial the extension.
1.
Log-in to programming
2. Enter 48 then #
3. Enter 0= disable or 1= enable then press #
4. Enter the number to access dial tone to dial an outside line, generally 9 is the default number for most PBX system, then press #
5. Select delay time for the PBX system to access dial tone, generally 2-3 second delay is plenty of time, then press #
Function Code 49 Edit Existing Access Code, Temporary Code and Special Code
1.
Log-in to programming
2. Enter 49 then #
3. Editing an Access Code
click here
or
Editing a Temporary Code,
click here
or
Editing a Special code, then
click here
Function Code 50 Erase Memory to Factory Default
Warning: This function code will erase the memory to factory default, no way to restore them unless the database has been saved in the computer.
1.
Log-in to programming
2. Enter 50 then #
3. Enter 0= cancel or 1= continue then press #
Function Code 51 Welcome Screen
It consists of three segments and 16 characters for each segment
1.
Log-in to programming
2. Enter 51 then #
Содержание 7000SC
Страница 5: ...8...
