PaceMaster R20 Series PM810, Руководство пользователя

Страница: 18 / 28

PAGE 18
PACEMASTER R20 SPORT TREADMILL USER MANUAL
BELT CARE AND LUBRICATION
You must lubricate your treadmill belt annually (or more often if your treadmill is
heavily used) in order to keep vital treadmill parts including the deck, belt, motor,
and motor controller from prematurely wearing out. Annual lubrication is required to
maintain the product warranty. Lubricating your treadmill can also help it run more
quietly and reduce friction between the belt and the treadmill deck.
HOW TO ASSESS YOUR TREADMILL’S BELT
The area between the running deck and the running
belt has been pre-lubricated. Excessive friction can
seriously decrease the treadmill’s performance, so
regular assessment and lucubration is essential:
check the treadmill’s lubrication levels regularly.
1. Unplug the power cord.
2. Inspect belt and deck by placing your hand between
the belt and deck. The deck should be smooth. The
belt should have a consistent feel from side to side
(a belt can be worn out without any sensory signs
of a problem). If you feel deep grooves in the deck
or uneven wear on the underside of the belt, part
replacement is necessary. Continued use of your
treadmill may damage the treadmill.
3. If your treadmill has an excessive accumulation of
dirt and contaminants you must clean them out. If
these are trapped during the belt lubrication process,
significant damage will occur. Do NOT apply
lubricant if there are contaminants under the belt.
Contact a Certified Service Provider for service if
contaminant removal is necessary.
LUBRICATION SCHEDULE
• Light Use: Apply lubricant once a year
(Treadmill is used less than 3 hours per week)
• Regular Use: Apply lubricant every 6 months
(Treadmill used up to 5 hours per week)
• Heavy Use: Apply lubricant every 3 months
(Treadmill used more than 5 hours per week)
LUBRICATING YOUR TREADMILL
1. Lift the running belt and inject 0.5 oz. of treadmill
lubricant across the running board. Do not put any
lubricant on any surface with which your feet make
contact. The lubricant will spread evenly in the next
step. Do not apply or spread the lubricant by hand.
2. Run the treadmill at the speed of 2 mph for 3 minutes
to fully permeate the lubricant (every treadmill has a
bottle of lubricant).
MAINTENANCE