PaceMaster R20 Series PM810, Руководство пользователя

Страница: 19 / 28

PAGE 19
PACEMASTER R20 SPORT TREADMILL USER MANUAL
3. Using your treadmill’s handrails and safety switch for
safety and support, walk on the treadmill at 2-3 mph.
CAUTION: BELT MAY HESITATE. THIS CAN CAUSE
INJURY IF BELT IS NOT PROPERLY TENSIONED.
Within 5 minutes the lubricant will be preliminarily
walked into the backing of the belt. Damage and/or
injury may occur if the belt is not properly centered
and tensioned (refer to the Troubleshooting section
of the user manual if needed).
CAUTION : Do not run on the treadmill until you are
certain the belt tension and centering is correct
according to your owner’s manual specifications.
Make certain that there are no friction spots that may
cause belt hesitation. Injury can occur if belt is not
adjusted properly.
HOW TO CLEAN THE TREADMILL
1. Always unplug the treadmill before cleaning it.
2. Dust out the treadmill regularly and keep all parts
clean. Clean both sides of the belt to avoid dust
accumulation under the belt. If needed, use a damp
soapy cloth to gently wipe the surface. Don’t splash
water onto any part of the treadmill.
3. If there is excessive dirt under the running belt or
inside the treadmill contact a Certified Service
Provider for service or assistance.
MAINTENANCE